DIGATRON TACHS/EXHAUST GAUGES

New Digatron gauge DT64 is now available. This gauge replaces the 50 series. The DT64 instrument has an advanced BUS port feature which can allow you to easily add additional input functions to your gauge, such as adding a fuel tester probe to your gauge and still have the ability to use the gauge for monitoring your engine functions. This gauge does not hook up to the snowmobile. The features of the DT64 are small lightweight billet design, all functions recorded 20 times a second, maximums for all functions displayed when the engine turns off, minimum readings of engine RPM and jackshaft RPM, configurable readings (fahrenheit or celsius/MPH or RPM), over or under limit warning lights, total engine usage time, configurable display, backlight, easily playback, 4 hours of recorded data, large easy to read display. The 50 series gauges have been discontinued from Digatron, and we only carry a few select parts that are available for these gauges. The 51 SN single display had offered a full hour of wrap around recording time and can monitor up to two exhaust temperatures plus engine RPM. Included with 51 SN are the standard 8 programmable LED alarms, lighting coil tach input, backlights, rechargeable internal power, and the free PC Download feature. The 52 SN had offered dual exhaust gas temperature displays, alarms, and alarm lights, Max Recall, back-lighting and recording time is 35 minutes. The 54 SN which had a 4 display with 240 minutes of recording, standard 8 programmable LED alarms, shift light indicator capabilities, backlights, rechargeable internal power. It also had optional PC download, optional jackshaft RPM and optional lap timing. The water temperature sensor is disabled, but could be activated at a later date. The digatron website is digitronusa.com to check out instructions and instrument comparsions.